All the templates
Each one is adjusted to your measurements in the browser and comes out as SVG or DXF, in millimetres and at 1:1. All of them are free to try; downloading them to cut comes with the subscription.
-
Tool FreeVectorizer
Turn a PNG or a JPG into an SVG ready to cut, at the size you need.
Traces the outline of the shape, or the centre line of the stroke if the drawing was made with a thick pen.
Open → -
Template New ProDollhouse
A dollhouse made to your measurements: you pick how many floors, how tall each one is and how many rooms it splits into.
Floors and rooms row by row, a gabled or single-slope roof, a lower side wing that stops it being a box, and each staircase wherever you want it.
Open → -
Template New ProGeodesic dome
A dome of triangles that clip together: pick the diameter and the frequency, and the pieces come out with the exact angles.
A sphere of triangles that clip together. Frequency 1V to 4V, half a sphere, 3/8, 5/8 or the whole sphere, solid or cut-out panels, and the holder hole to use it as a hanging lamp.
Open → -
Template New ProBook box
A box shaped like a book: cover, curved spine and back in one piece, a tray with dividers and a wooden or magnetic catch.
Cover, curved spine and back in one living-hinge piece. Tray with dividers, a wooden catch or magnets, and the title on the cover and the spine.
Open → -
Template New ProSlatted lamp
A hanging lamp made of rings and slotted slats: cone, globe, bell or tulip, with the hole for the lamp holder.
Rings and slats that interlock halfway, with no glue. Four profiles, as many slats as you like and the holder hole made to measure.
Open → -
Template ProBunting
A garland of pennants in the shape you choose, with a polka-dot, diagonal or zigzag pattern and one letter on each.
Five shapes, a polka-dot, diagonal, zigzag or striped pattern, and one letter per pennant: engraved, cut out or cut separately to glue on top.
Open → -
Template ProCross with text
A hanging cross with a prayer or a verse cut in negative: every row runs edge to edge across its section.
A prayer or a verse in negative: the rows share themselves out between the upright and the arm, and each one lands on the frame at both ends. Optional loop and backing.
Open → -
Template ProChristmas ornament
A tree ornament with a name: a ring with the name across it or lace with a band, with a bow and snowflakes.
The name crosses the ring and lands on it at both ends, or sits on a band with lace above and below. Optional bow, snowflakes and backing.
Open → -
Template ProName keyring
Type one name per line and all the keyrings come out together, ready to cut.
One or two layers, a hole for the ring, and the border that stops the dot of the "i" falling off.
Open → -
Template ProName with a flower
A name on a stem with a flower at the tip, in two layers to glue and contrast.
Flowers drawn by hand, cut out of the top layer so the colour of the backing shows through.
Open → -
Template ProDoor name sign
A name to hang on a door: a one-piece backing and every letter loose, so you can paint each one a different colour.
A one-piece backing, every letter loose to paint separately, and the hanging holes placed where no letter covers them.
Open → -
Template ProName puzzle
A board with the name cut out and every letter loose, to slot back in. It all comes out of one cut.
The letters are cut inside their own openings, with slot clearance and a finger hole to lift them out.
Open → -
Template ProQR code keyring
A QR code engraved on a square or round keyring, with the margin and module size it needs to actually scan.
Square or round, with a warning if the module came out too small for a camera to read.
Open → -
Template ProClock face
The face of a wall clock, with Arabic or Roman numerals, hour marks and minute marks.
Arabic or Roman numerals, upright or rotated, hour and minute marks, and the spindle hole to fit your movement.
Open → -
Template ProPhoto frame
A three-layer frame made to the size of your photo, with a slot to slide it in and a stand or holes to hang it.
The window smaller than the photo and the slot bigger, and a leg that jams itself in its own slot.
Open → -
Template ProPhoto jigsaw puzzle
The cut lines of a jigsaw made to the size of your photo: rows, columns and tabs that really do lock together.
It cuts lines rather than pieces, so every edge is travelled once and the tabs come out snug.
Open → -
Template ProCake topper
A name with legs to stick into the cake, in one single piece so nothing falls off.
It joins the letters until the topper comes out whole, and the legs grow where there is material rather than in mid-air.
Open → -
Template ProNotebook cover
Front and back covers for wire-o binding, with the 3:1 or 2:1 punching at its exact pitch.
A4, B5, A5, A6 or custom, with the binding pitch worked out in inches and the row of punches centred.
Open → -
Template ProBox making template
The physical template for marking and cutting boxes by hand: cut it once in MDF and it lasts forever.
Slots the width of your marker, cut in sections with bridges so the sheet does not snap.
Open → -
Template ProFolding box
The flat net of a box to cut and fold: tray, lid and base, or a flap box, with a window and score lines.
The fold lines come out on a separate layer so you can score them without cutting through, or perforated with bridges for thick card.
Open → -
Template ProStepped display stand
Stepped shelves for a counter: risers that close off each step, one-piece dividers and a sign on top.
Risers closing off each step, one-piece staircase dividers half-lapped in place, and the sign on top.
Open → -
Template FreeCurved corner box
A box with rounded walls: the wall bends on its own thanks to a living hinge cut into the MDF.
All four walls come out as a single strip with a living hinge, the length measured on the inner face, and a warning when the radius is too tight.
Open → -
Template ProShelving unit
A made-to-measure shelving unit: you pick how many shelves, how tall each one is and how many bays it splits into.
Each row with its own height and how many bays it splits into, shelves that pass through the sides, and a warning when a span will sag.
Open → -
Template ProDesk drawer unit
A made-to-measure drawer unit: you pick how many rows, how tall each one is and how many drawers fit in it.
Rows of different heights with different numbers of drawers, shelves that pass through the sides, and just enough clearance to run.
Open → -
Template ProDrawer organizer
Made-to-measure dividers for the inside of a drawer: they slot into each other and hold themselves up, no glue needed.
Measure the drawer and the dividers come out. Compartments of different sizes, half lap joints.
Open → -
Template ProHinged lid box
A box whose lid pivots on a wooden pin and stays open by itself, with no hardware: the pin is cut from the same sheet.
The lid pivots on a pin cut from the same sheet and stands up against the back on its own. No hardware.
Open → -
Template FreeFinger joint box
A made-to-measure box for laser cutting in MDF or acrylic, with an optional lid and dividers.
Inside or outside measurements, your choice of lid, internal dividers and kerf compensation.
Open → - Coming
More templates
New ones every month. If there is something you cut often and would like made to measure, write to us.